Green Laning 23-4-06

[Paul Humphreys]

Some pics of our day laning.

Paul

[Paul Humphreys]

More

[AJC]

Great images Paul. Hope you all had a great day.

AJ

[Paul Humphreys]

Some more.

[Paul Humphreys]

And the last.

Paul

[Paul Humphreys]

Try again.

[Paul Humphreys]

Great images Paul. Hope you all had a great day.

AJ

A really good day. I left home at 7-45am and got in at 9 pm.:D

Paul

[Pete H]

Great pics,looks like you all had a good day out :)

[Paul Humphreys]

All bar Floyd Fan, he got too close to a cattle feeder and put a grove down the side of his disco:( .

It was Geobloke, Floyd Fan, DavidJDavis, Rebel3 and my self.

Pail

[DavejDavies]

Great day out fellas :D :D Thanks again to Paul for his fine route finding as always.

Didn't get home till 10, took the round-about route to Bala before heading home... Just finished unloading the truck (including old wheels & tyres) and getting it ready for work tomorrow :rolleyes:

Had the perfect day to try my new Macho 265/75R16 tyres and 8 spoke wheels from http://www.uptotheaxles.com/, great price and conveniently located just outside Corwen close to the Wayfarer :D :D

New tyres are fantasic, loads more grip than my old Rangemasters :D

[Paul Humphreys]

Must have been the long long way around!:rolleyes: :rolleyes:
Paul

[DavejDavies]

Must have been the long long way around!:rolleyes: :rolleyes:
Paul

Yea, I put a route into MM a few days ago when I thought we would be finishing in daylight :D Up over Bwlch y Groes, down and around the side of Tegid - just followed that route forgeting it was a lot quicker going over to Bala direct :rolleyes: :rolleyes:

[Paul Humphreys]

Yea, I put a route into MM a few days ago when I thought we would be finishing in daylight :D Up over Bwlch y Groes, down and around the side of Tegid - just followed that route forgeting it was a lot quicker going over to Bala direct :rolleyes: :rolleyes:

You need TomTom?

Paul

[GezC]

Nice route Paul ....looks like a cracking day out..any pics of your motor in action...


Dave your tyes look great fella ..totally transformed :)

shame to hear about Jons damage ..

did rebel3 enjoy it?

[floyd fan]

Thanks for a great day Paul, Dave, Guy and Keith. Got home about 10, had me tea, had a bath, went to bed with a grin on my face :D:D:D:D:D:D.

Some pics....

[Paul Humphreys]

Nice route Paul ....looks like a cracking day out..any pics of your motor in action...


I think theres some, but as I was leading, theres not many.


did rebel3 enjoy it?

He seemed to :)

Paul

[floyd fan]

And some more....

[Geobloke]

I think theres some, but as I was leading, theres not many.



He seemed to :)

Paul

I got some. I will resize and post shortly!

Great day out fellas! Always a pleasure Paul, Floyd and DaveD. Nice to meet you Rebel, see you out again soon hopefully! :yay:

[jjsaul]

oooh very jealous

[DavejDavies]

Was a great day out, shame about the bits of damage and Geo getting beached - the worst bit of that was there was no photos as he rescued himself :D :D

I got my bumper bent on a very deep hole full of water at the top the steps - it had very steep sides and we did wonder if it was natural or man-made but it's difficult to tell :rolleyes:

Nice to side both Disco's having fun, really amazing what they achieved :D :D

[Geobloke]

Was a great day out, shame about the bits of damage and Geo getting beached - the worst bit of that was there was no photos as he rescued himself :D :D

Dammit I thought no-one had remembered that bit!!! :rolleyes: It was one of those daft moments where I rushed to catch you lot up and made a mistake! And there was that sinking feeling of "oh bollucks now what am I gonna do"! Thankfully there was a tree in the right place and close enough to reach with the winch! THank gaud for self recovery equipment!!! :D Oh and bugga yer know what I forgot to take a pic too, so in effect it never actually happened!!! ;)

I got my bumper bent on a very deep hole full of water at the top the steps - it had very steep sides and we did wonder if it was natural or man-made but it's difficult to tell :rolleyes:

Nice to side both Disco's having fun, really amazing what they achieved :D :D

Yeeeessss naturally made was it!!! by that trickle of a spring was it? :rolleyes:

[Geobloke]

Right I think this is my pic of the day! Sunset over Llyn Efyrnwy.

[Paul Humphreys]

Right I think this is my pic of the day! Sunset over Llyn Efyrnwy.

A very nice picture as well.

Paul

[Geobloke]

A very nice picture as well.

Paul

Cheers mate and just for that here's a pic of you! :D

[Paul Humphreys]

Cheers mate and just for that here's a pic of you! :D

Thats a even better picture. :)

I still want a +2 inch lift soon;) .

Paul

[Geobloke]

Thats a even better picture. :)

I still want a +2 inch lift soon;) .

Paul

Ooo eck it makes such a difference when offroad! Makes it much easier getting over obstacles and finding "the right line" to drive!

Articulate my axles baby!! :D

[Geobloke]

Mr Dave flexing it up with them new boots on!! :D

[Rebel3]

Paul, thanks for a fantastic day out, with your guidance I achieved more with my Discovery than I ever thought possible, I am utterly gob smacked with the things we did, i.e. the V gully!! :eek: I was ready to go home when I saw Jon doing impossible angles! :rolleyes: And the Steps!! After Dave had shown me the pictures of his little topple!*!!** :( Well I haven’t slept all night just reliving the moments, did I enjoy my self? Enjoyment!!! That’s an understatement, there was Joy, Fear, in trepidation, this is just bloody stupid, and shear elation all rolled into one emotion. :D

Also thanks to Jon, Guy, Dave and your dear lady for making me feel part of the team, hope to meet up with you all soon., Stopped on the way home for a McDonalds, arrived home at 10pm, 15 hours after leaving at 7am, thoroughly knackered but oh so thoroughly satisfied, and if you will have me??? I would really like to tag along again some time. Some great shots there lads, When I figure out how to put a web link on the forum I will show you my pics.
Paul I’m off now to have a look at joining Crag, and to look at getting some meaty tyres for my next outing. Thanks again chaps for a great day.

Thanks
Keith.

[Rebel3]

Ha Ha must still have mud in me eyes, have just noticed the link icon.
So here goes, have a look at the pic's i took.

http://myweb.tiscali.co.uk/keithmain/index.html

[floyd fan]

When I figure out how to put a web link on the forum I will show you my pics.
Keith.

When you make a post if you scroll down the page slightly you will see a button "Manage Atatchments", click this then you can browse to where you have the pics on your PC and upload them.

Great day, nice to meet another forum member. Comletely knackered when I got home aswell.

[Geobloke]

Paul, thanks for a fantastic day out, with your guidance I achieved more with my Discovery than I ever thought possible, I am utterly gob smacked with the things we did, i.e. the V gully!! :eek: I was ready to go home when I saw Jon doing impossible angles! :rolleyes: And the Steps!! After Dave had shown me the pictures of his little topple!*!!** :( Well I haven’t slept all night just reliving the moments, did I enjoy my self? Enjoyment!!! That’s an understatement, there was Joy, Fear, in trepidation, this is just bloody stupid, and shear elation all rolled into one emotion. :D


LOL yeah you were a little worried about getting up the steps and that gulley. Glad to see your happy you didn't turn around and go home! :yay: Your welcome anytime Keith to come along with me and I suspect with Paul too!

Some meatier tyres are a good investment, ask DaveD (you still grinning mate??? ;)) Also a spring lift too if your going to get really meaty rubber!

[Paul Humphreys]

Nice pictures Keith, and yes you or for that matter anyone is welcome to join me laning. As long as they are like you, responcebly laners.

It was a very good day, just a long one. Thats why when I say a days laning I mean a DAYS laning :D .

Paul

[Geobloke]

It was a very good day, just a long one. Thats why when I say a days laning I mean a DAYS laning :D .

Shouldn't that be Thats why when I say a days laning I mean a DAYS and NIGHTS laning :D ;)

Seriously tho! Great day out, had to really force meself outta me bed this morning!!

[Rebel3]

Your welcome anytime Keith to come along with me and I suspect with Paul too!

Some meatier tyres are a good investment, ask DaveD (you still grinning mate??? ;)) Also a spring lift too if your going to get really meaty rubber!


Thanks Guy, Yes I was seriously thinking of a lift and some meaty tyres – until you beached yourself he he he, :D and I thought you had just stopped for a wewe.

[Geobloke]

Thanks Guy, Yes I was seriously thinking of a lift and some meaty tyres – until you beached yourself he he he, :D and I thought you had just stopped for a wewe.

Lol and who said I didn't too!!!! :D

Now if I'd of had 35" tyres i'd have just driven over it! all I needed was about 1/4" extra clearance! Daft mistake! :rolleyes: Just shows why you shouldn't take a ditch or hump straight on doesn't it!! Always at an angle! ;)

[Rebel3]

Nice pictures Keith, and yes you or for that matter anyone is welcome to join me laning. As long as they are like you, responcebly laners.

It was a very good day, just a long one. Thats why when I say a days laning I mean a DAYS laning :D .

Paul

Thanks Paul, It’s the most fun I have had outside the bedroom!!! I think? :o Do you know I forget whether I have or haven’t nowadays he he he.

[DavejDavies]

Right I think this is my pic of the day! Sunset over Llyn Efyrnwy.

LOL as we were heading home and saw the sunset I said to Mrs D "I bet Guy stops and takes a snap" :)

Great pic fella, the view to the west from the top before dropping down towards Bala was spectacular with the sun going down but I didn't stop - wish i had now...

[DavejDavies]

Dave your tyes look great fella ..totally transformed :)

Yes :D :D :D :D :D :D :D :D

The wide tyres grew on me seeing your's and Guy's 265s in action in the woods :D

Can't believe the tread depth :rolleyes: Road handling seems good too :D

[DavejDavies]

Mr Dave flexing it up with them new boots on!! :D

Very nice :D :D :D

Glad I had the new boots on :rolleyes: :)

[Rebel3]

Hi Jon,
Have you washed your motor yet? Reluctantly jet washed mine today, dear lady said I can wash it or park it round the corner!!!:rolleyes: Women!!** :(I don’t think there is a panel that has not got a scratch on it, how is yours looking mate? Will have to wash it with bucket and sponge with some wax in it, and see how it looks after.
If yours looks like mine, and it is in a similar state to the previous time you went off road, how the hell did you get it to look as good as it did Sunday? What make of T-cut did you use?


Paul, I hope there is no law about pinching soil from the Welsh hills, I’ve got loads of it on my drive, :eek: ha ha.


Hope to get a 2” lift, and bigger tyres for my next outing, but its always the same, when your not in the market for doing the lift, etc, you see loads of springs and setups, But, as soon has you decide to go and fit your lift, bingo, were did I see so and so for sale, “bah umbug” or words to that effect.:banghead2


Any input, where, and what make of spring, and anything else you think I should fit with a 2” lift would be gratefully received.:p


Guy, how are the photo’s looking? Really liked the one of me and mine in the V-Gully, and going up the STSTSTEPPPSS, Any chance of putting some more on line, for a peek?;)


Dave, sorry mate, didn’t realise you had new boots on, thought they were just a pair of old rigger boots cleaned up, he he. :D

Cheers me dears.
Keith.

[Paul Humphreys]

I am going for Old Man Emu springs. But I am told Iron Man are good as well. But stay away from the one type of Blue speings. I had them on a RRc and they were rubbish. The Yellow Britpart one are ok so I am told.

As for the mud, its good for the garden!! But are you sure its all mud after Poo City???

Paul

[Rebel3]

As for the mud, its good for the garden!! But are you sure its all mud after Poo City???

Paul

LOL, so thats what the smell is!!! and i thought it was my new air freshener.

[SuziD]

Fantastic day, thanks folks. Good to see you all again, and to meet you Keith. Photo's excellent, the one's of Jon in the V gully make you hold your breath and pray. Lovely sunset Guy. David must have had a Heathcliff and Cathy moment when he planned our route home, talk about deserted............even the sheep had gone home, nothing but miles of moorland.

This woman loves her Landy muddy, the problem is most of it's on the inside!!! Woof :D

[Rebel3]

Hello SuziD,
Nice meeting you: hope to see you again soon: yes it was a great day out, nice weather, nice Country, and a nice crowd of people, topped of with some buttock clenching moments, what more could one ask for.
Early mornings and late evenings, what lovely times of the day – no hustle no bustle – the road to your self - the warm air - the tranquil views – the time when a young mans fancy turns to “”” HOLD ON NOW!!!! Well! Yea okay Dave, I get the drift.
Yes I know what you mean about the mud in the motor, we have always had dogs and cats for pets, going back as far as I can remember! But sadly, within the space of 12 months we lost both our dogs together, and the cat about 6 months later, but they were all of a good age, the cat was 23 years old. We have a wild cat that has been visiting us for a few weeks, Patricia my other half has started to feed it, and low and behold, it has started to come into the house, and she has even been able to stroke it so: it looks like we have adopted the little beggar.
We have always had big dogs: Alsatians’ and Rottweiler’s but I am thinking of having a little Jack Russell for a change - - less poo to get up!!

[Rebel3]

I am going for Old Man Emu springs. But I am told Iron Man are good as well. But stay away from the one type of Blue speings. I had them on a RRc and they were rubbish. The Yellow Britpart one are ok so I am told.

As for the mud, its good for the garden!! But are you sure its all mud after Poo City???

Paul
Check this Paul

http://cgi.ebay.co.uk/Old-Man-Emu-suspension-springs-landrover-defender_W0QQitemZ4634841124QQcategoryZ31348QQssPa geNameZWDVWQQrdZ1QQcmdZViewItem

[Paul Humphreys]

Check this Paul

http://cgi.ebay.co.uk/Old-Man-Emu-suspension-springs-landrover-defender_W0QQitemZ4634841124QQcategoryZ31348QQssPa geNameZWDVWQQrdZ1QQcmdZViewItem

No good for mine as I need a bigger diameter for the back. But they might be ok for yours.

Paul

[DavejDavies]

Hope to get a 2” lift, and bigger tyres for my next outing, but its always the same, when your not in the market for doing the lift, etc, you see loads of springs and setups, But, as soon has you decide to go and fit your lift, bingo, were did I see so and so for sale, “bah umbug” or words to that effect.


Having recently been thinking about +2 springs I've gone off the idea for the moment until I can get some +2 shocks and extended brake lines.... don't know if the same is recommend on your Disco? Think Geo is a big fan of removing Disco anti roll bars - don't know if you have one and if you'd get any benifit :rolleyes:

[floyd fan]

Hi Jon,
Have you washed your motor yet? What make of T-cut did you use?

Not had time to wash it yet, but at least the mud covers most of the damage :eek:.

I think its just carplan T-cut for metalic paint, then a quick wax.

... Jon ...

[DavejDavies]

Not had time to wash it yet, but at least the mud covers most of the damage :eek:.

I think its just carplan T-cut for metalic paint, then a quick wax.

... Jon ...

Real shame Jon, you did a fine job with the T-cut, didn't even see the cattle feeder which attacked your N/S :rolleyes: :(

With that, 2 Disco mirrors and the ding in my bumper we'd better see if Land Rover Parts will sponsor our next outting :eek: :rolleyes: :D :D

[Geobloke]

Having recently been thinking about +2 springs I've gone off the idea for the moment until I can get some +2 shocks and extended brake lines.... don't know if the same is recommend on your Disco? Think Geo is a big fan of removing Disco anti roll bars - don't know if you have one and if you'd get any benifit :rolleyes:

I was having a think about Rebels anti-roll bars today and I think he should keep them on for the time being. If my mental mechanics is working properly they are preventing the springs form dislocating and also (more importantly) preventing the brake lines from being ripped out! So until you do get a 2" lift with extended brake hoses leave the anti-roll bars on! Once you do have the lift then whip em off and go and enjoy all that articulation, you saw the difference it made when Eva came to get across obstacles!

Thats Geo's view anyhow!

I will post pics in a short while, tea first!

[floyd fan]

2 Disco mirrors and the ding in my bumper we'd better see if Land Rover Parts will sponsor our next outting :eek: :rolleyes: :D :D

Now wouldn't that be nice :D:D:D.

[floyd fan]

didn't even see the cattle feeder which attacked your N/S :rolleyes: :(

Thats because I'de knocked it for six out of the way:eek:.

[GezC]

different subject I know but can anyone help with a parts list for my 200tdi ????

[Geobloke]

Right then here comes the pics, in order they were taken too! :D

These are of the V-gulley and "that" hairy moment!!! :eek:

[Geobloke]

And now the meeting up with DaveD and the Shiney White 8 Spokes!

Through the Corwen Carwash and on the way up the wayfarer.

And a few Eva posing shots too! :D :D

EDIT: Almost forgot damage to both the Disco's wing mirrors too!

[Geobloke]

From the top of the Wayfarer down again.

Pen steps and DaveD going up them.

[Geobloke]

Rebel and Floyd going up the steps and also the PIT OF DOOM! :( Or at elast for DaveDs bumper!

That hole was very deep and I suspect not entirely natural!!

[Geobloke]

Top of the steps, Floyds damage on the wing of his disco - time for a snorkel dude! DaveDs damaged bumper - and a winch bumper and winch for you!! :D

A ford I cannot remember the name of.

[Geobloke]

And the last...

What a superb day out people! again again... :yay:

[Paul Humphreys]

Very nice pics Guy.

Paul

[floyd fan]

Good pics Guy, worth the wait ;)

[DavejDavies]

Yea, great photos Guy, well worth the wait :D

The one of Jon in the v gulley sticking his head out of the window is a classic :D :D

[Rebel3]

Yea Dave, on the read ups they all recommend longer brake pipes etc. Have anti-roll bars, feel a little reticent about taking them off, I like to let it all hang out on the corners! Might just let it hang out too far with anti’s off.

Guy, well thought out, agree 100% with your thoughts, looks like I will have to slow down on the bends and islands then, when the ant’s come off.

Cracking shots Guy, I think I have told just about everyone at work about our momentous trek through the, enclosing V-Gully and it’s scissor like jaws, the beautiful serene undulating hills, that entice you into its treacherous slippery grip and will not let you go, the devils own steps that try to hammer you into submission as they lead you to the gateway of heaven, and then, to top it all, if you survive all that there is the - “holding nose” – POO CITY, oh I think I’ve forgotten to tell the tea lady, it’s hard work trying not to forget someone when there’s about 400 people to tell.

[DavejDavies]

Jon

Looking at the photos of you in the v-gully it really looks like your step were stopping you going over ? :rolleyes:
If that was the case you might be better leaving them on :D

[Paul Humphreys]

I think if I had not shouted "STOP" he would have gone over!

Paul

[DavejDavies]

I think if I had not shouted "STOP" he would have gone over!

Paul

:eek: In that case Jon you can be considered an honary member of the roll over club :D

I swear Jon and Keith are smiling in every photos despite a few little mishaps with wing mirrors etc :rolleyes:

[GezC]

I think if I had not shouted "STOP" he would have gone over!

Paul

Good call Paul!!!! Looks quite close there ,,,saved him a lot of damage me thinks..

Jon Its good practice to keep your window Closed when attempting steep side slopes .Its instinctive to put your Head/Arm out to save yourself ,Ive done it myself Mate.. dread to think:o :o :o

Nice pics Guy :D

Dave your bumper looks fine fella ..Thats how they come out of the factory :D :D :D :D :D The great British tolerance:D :D :D :D :D :D

[Paul Humphreys]

Well there was 6 inches under the front wheel and the gap was getting bigger!:eek:

As for Daves bumper, I think its time to chang it for something stronger. Maybe a winch bumper????:D

Paul

[GezC]

Well there was 6 inches under the front wheel and the gap was getting bigger!:eek:

As for Daves bumper, I think its time to chang it for something stronger. Maybe a winch bumper????:D

Paul


What a great idea!!:D :D :D :D :D Go on Dave :p :p

Talking of winches Have you had a look at your yet Paul???? whats the verdict??

[Paul Humphreys]

What a great idea!!:D :D :D :D :D Go on Dave :p :p

Talking of winches Have you had a look at your yet Paul???? whats the verdict??

It dose work, I just need to play about with the pressure relief valve. I will try to do it latter this week.

I have been looking at springs and shocks. I know someone who is having a new make of shock made and I hope to be one of the first to have them fitted.;) . Just need to get some reat raised shock mounts made as the shocks are 6 inches longer than standard. The front mounts ore easey to make.

Paul

[DavejDavies]

Dave your bumper looks fine fella ..Thats how they come out of the factory :D :D :D :D :D The great British tolerance:D :D :D :D :D :D

Got a ding in it both sides now - sort of makes it more areodynamic :rolleyes: :rolleyes: :D :D

[DavejDavies]

As for Daves bumper, I think its time to chang it for something stronger. Maybe a winch bumper????:D

LOL - You'll get me in trouble :D - I can't afford any more 'accident' inspired purchases this year :rolleyes: :)

When I have enough pennies saved for a winch I was planning on a bikini type mount anyway to let me keep the standard bumper :rolleyes:

[GezC]

It dose work, I just need to play about with the pressure relief valve. I will try to do it latter this week.

I have been looking at springs and shocks. I know someone who is having a new make of shock made and I hope to be one of the first to have them fitted.;) . Just need to get some reat raised shock mounts made as the shocks are 6 inches longer than standard. The front mounts ore easey to make.

Paul

Flippin Nora 6 inches ..serious stuff that..Have you been asked to bench test them???

just trying to think if the inner rear arch is flush with the chassis or if youll have to cut into the tub either way its an interesting little project that.... Itll make the 110 look like a spider climbing a rope:rolleyes: :rolleyes: :D

I can see Huge yokes and Trailing arms being added to your wish list:D :D

[GezC]

Got a ding in it both sides now - sort of makes it more areodynamic :rolleyes: :rolleyes: :D :D

Thats the spirit Dave:D :D :D :D :D

[DavejDavies]

I have been looking at springs and shocks. I know someone who is having a new make of shock made and I hope to be one of the first to have them fitted.;) . Just need to get some reat raised shock mounts made as the shocks are 6 inches longer than standard. The front mounts ore easey to make.
Paul

Suppose you have ruled out a 6 inch lift :rolleyes: :rolleyes: :D

[Paul Humphreys]

Flippin Nora 6 inches ..serious stuff that..Have you been asked to bench test them???

just trying to think if the inner rear arch is flush with the chassis or if youll have to cut into the tub either way its an interesting little project that.... Itll make the 110 look like a spider climbing a rope:rolleyes: :rolleyes: :D

I can see Huge yokes and Trailing arms being added to your wish list:D :D

Thats why I think I will need to make the mounts. I dont want to cut the tub. But with the offset of the wheels I have enough room.

Trailing arms and castor correction arms on list. Might have to go for another front prop but think the back will be ok as its long on the 110.

Still waiting for the lenght of the front shocks to come, but I think 4 inches over standard, but the turrets are easy to get. As are the break pipes, I am having them made 6 inches over standard. I have the rear dislocation cones, I got the ones that go on the axel and not at the top.

Paul

Paul

[Paul Humphreys]

Suppose you have ruled out a 6 inch lift :rolleyes: :rolleyes: :D

Yes only going for a 2 inch lift for now. But could always add 2 inch spacers at a later date:D :D :D :D

Paul

[DavejDavies]

Thats why I think I will need to make the mounts. I dont want to cut the tub. But with the offset of the wheels I have enough room.

Trailing arms and castor correction arms on list. Might have to go for another front prop but think the back will be ok as its long on the 110.

Still waiting for the lenght of the front shocks to come, but I think 4 inches over standard, but the turrets are easy to get. As are the break pipes, I am having them made 6 inches over standard. I have the rear dislocation cones, I got the ones that go on the axel and not at the top.

Paul

Paul

:eek: It will be unstopable :rolleyes: :D

You're probably alrady aware of these fellas who seem to have extended shock mounts?

http://www.gon2far.co.uk

[Paul Humphreys]

Yes Dave, I have the Reverse cone kit for the back. I think they have stoped doing the coil spring kits now. On that note I got the rear kit from a member of this forum. I will ask him about the shock mounts.

Paul

[floyd fan]

:eek: In that case Jon you can be considered an honary member of the roll over club :D

Thanks but its not realy a club I had the mind to join :D:D

I swear Jon and Keith are smiling in every photos despite a few little mishaps with wing mirrors etc :rolleyes:

Still grinning now mate, pity I cant make it this Sunday. Eventaully got to the car wash today, I can see the scratch better now so I could do with going on Sunday just to find some more mud!

[DavejDavies]

Thanks but its not realy a club I had the mind to join :D:D

LOL - don't blame you - lucky that step and Paul's shouting saved you :)

Still grinning now mate, pity I cant make it this Sunday. Eventaully got to the car wash today, I can see the scratch better now so I could do with going on Sunday just to find some more mud!
Shame you can't make Sunday, not long now till the Snowdon run - see you there if you're still going :)

[Paul Humphreys]

Still grinning now mate, pity I cant make it this Sunday. Eventaully got to the car wash today, I can see the scratch better now so I could do with going on Sunday just to find some more mud!

I dont have anything planned for Monday??:D :D :D :D :D

Paul

[floyd fan]

I dont have anything planned for Monday??:D :D :D :D :D

Paul

Leave me alone!!!:rolleyes::D:D:D

[DavejDavies]

Leave me alone!!!:rolleyes::D:D:D

LOL

Don't know about Land Rover Parts sponsoring our trips but makes you wonder if Paul is on commission :D :D

[floyd fan]

makes you wonder if Paul is on commission :D :D

Is that some sort of designer drug:eek:

[Paul Humphreys]

I just like being out in the countryside:D :D . Talking of that I might be out around Shropshire Saturday as well.

Paul

[GezC]

I just like being out in the countryside:D :D . Talking of that I might be out around Shropshire Saturday as well.

Paul
That 110s gunna do more milage in its first month with you than the hubble telescope!!!!:D :D :D

[Paul Humphreys]

That 110s gunna do more milage in its first month with you than the hubble telescope!!!!:D :D :D

Well in the first 10 day of ownership I did 850 miles:D and its not my everyday car.

Paul

[DavejDavies]

I just like being out in the countryside:D :D . Talking of that I might be out around Shropshire Saturday as well.

Paul

LOL

You may as well convert the 110 into a camper and live in it :D

[Paul Humphreys]

Funny you should say that Dave. I am going to put in a rasired floor to keep all the stuff under. So it will be a flat area in there. A blow up bed would fit nice.

Paul

[DavejDavies]

Funny you should say that Dave. I am going to put in a rasired floor to keep all the stuff under. So it will be a flat area in there. A blow up bed would fit nice.
Paul

Think it would

:D :D :D :D